Payment & Shipping Terms:
|Explosion-proot Grade:||Exd II CTI - 6||Protection Class:||IP66|
|Workong Pressure:||1.0 - 20 Mpa||Applicable Industries:||Energy & Mining|
|Dimension Of Working:||DN200*1000mm||Power Source:||Electric|
stainless steel heat exchanger,
fluid heat exchanger
Explosion-proof electric heater with convenient installation and small weight
The fluid explosion-proof electric heater converts electrical energy into heat energy to heat the material to be heated. In the work, the low-temperature fluid medium enters its input port under the action of pressure through the pipeline, and flows along the specific heat exchange inside the electric heating vessel, and uses the path designed by the fluid thermodynamics principle to take away the high-temperature heat energy generated in the work of the electric heating element, so that The temperature of the heated medium rises, and the electric heater outlet obtains the high temperature medium required by the process.
The electric heater internal control system automatically adjusts the electric heater output power according to the temperature sensor signal of the output port, so that the medium temperature of the output port is uniform; when the heating element is overheated, the independent overheat protection device of the heating element immediately cuts off the heating power source to avoid Overheating of the heated material causes coking, deterioration, and carbonization. In severe cases, the heating element burns out, effectively extending the service life of the electric heater.
1. High intelligent standards.
2. It can realize the uninterrupted transmission of the internal high temperature voltage system.
3. The equipment has the advantages of precise structure, light weight, light weight and convenient installation process.
4. The internal high-voltage system of such equipment can provide the DCS system with alarm signals such as running, high temperature, fault, and outage, and can also accept the operation signal such as automatic signal and shutdown of DCS, and the electric heater system. A reliable and safe monitoring device has been added, but the price reference for this electric heater is relatively high.
5. The electrical equipment has multiple associated interfaces, and the temperature of the heat transfer oil pump, the heat transfer oil, and the internal high temperature voltage can be effectively monitored at any time. Therefore, the idealized reform of the explosion-proof electric heater is more energy-efficient, environmentally friendly and more efficient.
|Explosion-proof grade||Exd II CTI - 6|
|Working pressure||1.0 - 20 Mpa|
|Working temperature||0 ~ 350 ℃|
|Heating medium||water, HCF|
|Nominal power||300kw - 6000KW|
Process heating applications which require temperatures between 350 and 650° F can frequently be serviced more dependably, efficiently, uniformly and safely with a Thermal Liquid System as opposed to a steam, water, electric or direct fired system.
Over the past 50 years, thermal liquid systems have been used in a wide vari ety of applications. The following are some common uses:
Contact Person: gaoyi