Payment & Shipping Terms:
|Condition:||New||Rated Working Pressure:||0.7Mpa(7bar)|
boiler in thermal power plant,
industrial water boiler
Fully Automatic Industrial Steam Generator , Steam Powered Electric Generator
The use of natural magnet copper float ball level controller, anti-oxidation, regardless of the water quality, the service life is extended by 2 times to recover waste heat, saving more than 30% safety: the use of electric heating, no fire, no safety risks.
Energy saving: the thermal efficiency reaches more than 98% and the temperature rises quickly. It can be used in about 8 minutes.
Environmental protection: zero emissions, zero pollution.
Scope of application:
1. Unique internal structure design for boiler use license exemption
The water volume of this series of products is less than 30L, within the scope of the national boiler license, that is, the boiler license is not required. The furnace is equipped with built-in steam separator, which solves the problem of steam carrying water and guarantees the high quality of steam.
2. Adopt high-quality core component -- electric heating tube
The electric heating tube is not only made of high-quality thick-walled 316L stainless steel tube, whose service life exceeds that of the commonly used 304 stainless steel tube by 30%, but also adopts imported high-temperature magnesium oxide powder and sealing material, which can withstand high temperature up to 900℃. Better ensure the service life of electric heating tube.
3. Use high-quality components
All pipes and instruments are connected with stainless steel pipe or copper pipe, electrical appliances are the most famous brand in China, Germany imports delixi electric appliances, safe and reliable, luxurious configuration.
4. Multiple interlocking safety protection functions
The product is equipped with safety valve, pressure controller and other overpressure protection verified by the boiler inspection office to prevent explosion accidents caused by excessive pressure of the boiler; At the same time, it has the protection of extreme low water level, and the boiler will automatically stop working when the water supply is stopped, preventing the boiler from dry burning and even burning out the electric heating element. Leakage protector makes the safety of operators and equipment more guaranteed, even in the case of circuit short circuit caused by improper boiler operation, leakage boiler will automatically cut off the circuit, timely protection of operators and control lines.
5. Simple installation and easy to use. Finger motion automatic
The products have passed strict debugging before they leave the factory. The user only needs to connect the power supply and water source and press the start button. The boiler can enter into full automatic operation state without complicated installation.
6. Scientific design and exquisite appearance
Adopt scientific design style of cabinet type, interior design structure is reasonable, maintenance is extremely convenient. Boiler shell adopts CNC cutting and CNC folding molding process, fine workmanship; The shell surface is sprayed with high temperature plastic treatment, durable, beautiful and generous appearance.
36 kw 48 kw power
Rated evaporation capacity 65L/h 85L/h
Voltage class 380v 380v
Steam temperature 171℃ 171℃
Internal furnace pressure 0.7mpa 0.7mpa
Tank volume 29L 29L
Size 870 * 630 * 770 * 570 * 1060 mm to 1160 mm
Weight 90 kg, 110 kg
1. The material
The inner liner and water tank are made of boiler carbon steel, the steam is 100% clean and the service life is long.
2. Energy saving
Small volume, pure steam and no moisture, thermal efficiency of over 98%.
Water shortage in the water tank is an automatic alarm, and the water pump will stop working automatically to prevent the phenomenon of dry operation without water and extend the service life
The water level gauge is equipped with observation lamp, making it more convenient and quick to observe the water level.
Pressure control automatic power off and heating, spring safety valve pressure is too high automatic exhaust to ensure safety
The water tank can be filled automatically or manually.
Novel, beautiful and elegant appearance, small size, easy to carry
Pressure control: when the working pressure reaches the high setting pressure, the electric heat pipe will automatically power off and stop heating. The heating indicator is not on; When the working pressure drops to low setting pressure, the electric heat pipe will automatically resume heating, and the heating indicator light will be bright.
Water level control: when the water level of the boiler barrel rises to the highest water level, the water pump will automatically cut off power and stop adding water. The water inlet indicator will not work. When the external water is cut off or the pump fails to light up, the boiler can not be filled with water, at the same time, the electric heat pipe will stop heating when power is cut off, and the heating indicator will not be on, the operator should stop the furnace in time to find out the fault cause until the fault is eliminated.
Matters needing attention:
1. In order to ensure the personal safety of users, the chassis must be firmly grounded before use.
2. It is not allowed to adjust or replace large safety control insurance parts at will.
3. When removing the scale and other foreign bodies in the furnace, open the bottom blowdown valve when the pressure in the furnace is lower than 0.1mpa, and expel the scale and other foreign bodies together with steam. Attention should be paid to safety before opening the sewage valve. Personnel should avoid the sewage outlet to avoid scalding and other accidents.
4. In order to prolong the service life of the machine and prevent excessive burning of the electric heat pipe, the machine should use soft water (with soft water equipment), and regularly remove the surface scale of the electric heat pipe or liquid level controller.
5. When the power supply voltage is lower than the operating voltage, the suction of the relay and ac contactor will decrease, which may continuously jump and be easily damaged. At this point, the machine should be shut down and started up for use after the voltage is normal.
Contact Person: gaoyi