Payment & Shipping Terms:
|Explosion-proot Grade:||Exd II CTI - 6||Protection Class:||IP66|
|Workong Pressure:||1.0 - 20 Mpa||Working Temperature:||0 - 350 ℃|
|Nominal Power:||10 - 6000 KW||Rated Voltage:||220V|
stainless steel heat exchanger,
fluid heat exchanger
Small volume Explosion Proof Electric Heater Customized Power And Voltage
Explosion-proof electric heaters are an international overview of popular high-quality long-life electric heating equipment. The internal control system automatically adjusts the output signal power of the heater based on the output temperature sensor of the electric heater to make the output medium temperature uniform.
When the heating element is overheated, the heating element independent of the overheat protection device immediately cuts off the heating power source, avoiding the coke which is overheated by the heating due to heating, deterioration, carbonization, causing serious heating element burnout, effectively extending the electric heater. Service life.
Working principle of explosion-proof electric heater: Explosion-proof electric heater converts a consumed liquid into heat energy and heats the material to be heated. The cryogenic fluid enters the input port through the pipeline under working pressure, and uses the thermodynamic principle to design the fluid path along the internal heating vessel for the specific flow passage, absorbing the heat energy generated by the working part, so the heating temperature is raised, and the electric heating is performed. The heat output process of the device is medium.
|Explosion-proof grade||Exd II CTI - 6|
|Working pressure||1.0 - 20 Mpa|
|Working temperature||0 ~ 350 ℃|
|Rated voltage||110V, 220V, 380V, 440V, 660V|
|Heating medium||water, HCF|
|Nominal power||10kw - 6000KW|
1. Can be manufactured in carbon steel,stainless steel, Incoloy.
2. Various wattages and voltages available
3. Various element diameters according to your need
4. Several flange sizes available
5. Can be manufactured to different shapes
6.We have high technolagy to make the bend radius very small, then the flange and tank also can use smaller size, then can save a lot cost.
7.With overheat protector, can adjust temperature automatically to avoid damage heater and heat mediums.
1. All kinds of oil, especially the impure oil, we have special design to make impurty not affect heating effection.
2. All kinds of water.
3. All kinds of caustic solution
4. All kinds of gas, like nature gas, CH4,N2,O2,H2,etc.
5. Ather can heat liquid and gas
Contact Person: gaoyi